威秀PLA+碳纖維 使用說明 

Version 20231011

建議使用硬化剛噴嘴

The parameters of the hot end of each brand of 3D printer are different, depending on the printing condition.

Specialized models are still subject to print conditions.

Large print area requires high flow rate, temperature can be increased appropriately.

Smaller models require less flow and lower temperatures.

Printer Setup of Bambu Lab:

1. Choose Generic PLA
2. Open Generic PLA
3. Modify the nozzle temperature 220 for the first layer, 210~220 for other layers.
4. Textured PEI Printing Sheet First Layer 60 Other Layers 60
5. Speed Internal wall 250mm/s Sparse fill 250mm/s